Our new Sani-kit makes on-site water cooler maintenance simple by providing you with the essential parts which require change-out rather than the hassle of actually cleaning the cooler at the clients location. Switch out the parts with clean ones and bring the dirty parts back to the shop. Once clean, you can rotate these parts on the next scheduled maintenance visit.

You no longer need to bring the cooler back to the shop to sanitize or carry a chlorine solution into your clients office. No mess, no fuss, a quick visit, low cost, low labour cost.
Think of the time and money you will save.

The kit includes:

• 1x Reservoir, 1x set of faucets, 1x drip tray and 1x pair of gloves

How to use a sani-kit in a Quantum cooler:

• Remove the cooler cover
• Shut the water off to the filtration system
• Remove the filter tree/float system by lifting it straight up and out of the tank
• Empty the water reservoir by draining the water out from the faucets
• Remove the white faucet by turning it clockwise one quarter (1/4) turn and pulling it out towards you.
• Remove the blue faucet by turning it counter clockwise one quarter (1/4) turn and pulling it out towards you.
• Remove the water reservoir by lifting it straight up and out
• Replace all removed parts with clean parts from Sani-kit
• Re-install the filter tree/float system in to the reservoir