Everpure® Coldrink® 7CLM+ & XCLM+ Systems

For Fountain Beverage

Chloramines Reduction Solutions

 

Why filter for fountain drinks?  Taste, consistency, carbonation

Taste – Fountain beverages are 83% water.  To control the taste you have to control the largest ingredient – water.

Consistency – To ensure your beverages taste the same day in and day out, from one location to the next. There is a saying in foodservice – You can feed ’em crap, just keep it consistent!

Carbonation – microscopic dirt particles, too small for the human eye to see, are naturally present in water.  Those small particles of dirt will kill carbonation causing drinks to go flat.  In addition to causing abrasion in equipment.

 

Understanding Chloramines:

  • Chloramines is chlorine bonded with ammonia. This provides more stability for better disinfection over long distances in pipe lines
  • Like chlorine, chloramines is used to make water safe to drink by killing organisms, bacteria and viruses that cause waterborne illnesses
  • Chloramines can be used as a primary disinfectant in lieu of chlorine
  • Your water supply may have been switched to chloramines and this may explain any tastes issues that you are having
  • It lasts two to three days instead of just a few hours for free chlorine
  • Also, because it is less likely to create byproducts such as THM’s, it helps municipalities to meet new guidelines for drinking water quality
  •  Most importantly, it’s a cost effective disinfection solution
  • All CLM+ systems are certified NSF/ANSI Standard 42

 

Peace of mind: All systems come with a five-year manufacturer’s warranty.  Join our national service programme, DanaCare, and we will cover you for life!

 

Let us help you with choosing the right system at technicalcare@danamark.com.  How about installation?  We’ve got you covered!   We have a national network of experienced service providers, at your service.

 

Here is a link to our Customer Care team – askus@danamark.com

 

Please click on the “DOCUMENTS” tab below to see the full product line spec sheets.

 

Connect with us

  • Service Flow Rate: Please refer to spec sheets
  • Pressure Requirements: 10 - 125 psi (0.7 - 8.6 bar), non-shock
  • Maximum Temperature: 35 - 100F (2 - 38C)
  • Capacity: Please refer to spec sheets
  • Dimensions: Please refer to spec sheets

This product works best with these applications

Pentair announces NSF Microplastic Reduction Claim

We are pleased to announce an update to the Pentair Everpure NSF-certified list of specified products to include a Microplastics reduction claim. Microplastics fall under NSF/ANSI Standard 401 for Emerging Contaminants and Incidental Contaminants. Note that, like the pharmaceuticals, pesticides and...

Get in touch