Everpure® Endurance® CSR Cartridge Kits

Everpure Endurance Replacement Cartridge Kits

The Everpure Endurance™ High Flow water filter system is designed to treat up to 200,000 gallons of water per year. The system uses a  pretreatment filter, 2, 3 or 4 fine cartridges and a scale inhibiting cartridge.

We have three different cartridges kits for you to choose from:

#EV9628-70 Twin Endurance Cartridge Kit  – 7.5 gpm flow rate – 100,000 gallons capacity

#EV9628-71 Triple Endurance Cartridge Kit – 11.25 gpm flow rate – 150,000 gallons capacity

#EV9628-72 Quad Endurance Cartridge Kit – 15.00 gpm flow rate – 200,000 gallons capacity

Use only genuine Everpure replacement cartridge kits to protect your system’s performance, NSF certification and 5-year warranty.

Maintenance:

• Replace all the filter cartridges when capacity is reached or when flow becomes inadequate, but at least annually. All
  cartridges on multiple cartridge systems should be changed at the same time.
• The system pressure gauge provides a quick, simple means of determining when the filter cartridge(s) should be checked. It
  is installed on the system outlet manifold. The gauge can be used to monitor both dynamic (flowing) and static (line) pressure.
• The cartridge(s) should be changed when the pressure gauge is in the red area while equipment is in operation, and the needle
  shows adequate line pressure between cycles. Observe the needle during the next equipment on cycle. If the needle registers
  adequate pressure, it can be assumed that the temporary low-pressure condition was caused by a brief power failure or other
  incoming pressure disruption.
• If the low pressure condition is not due to an external condition, check/change the pretreatment filter first. If the low pressure condition is still not corrected, change the SEN carbon filter cartridges.
• For maximum life, all carbon filter cartridges must be flushed for five minutes at full flow before use. All new cartridges must be flushed after each cartridge change before being put into service

If you need help with how to change the cartridges, please contact us at technicalcare@danamark.com or give us a shout at 1-888-326-1108

If you would like us to change the cartridges for you, please consider joining our Danacare Programme and receive our DanaSurance Lifetime Warranty on the hardware.  To join, please contact us at danacare@danamark.com or give us a shout at 1-888-326-0901

We also have upgrade options for existing Everpure High Flow CSR Manifolds / Systems:

EV9437-60 – SEN Triple Upgrade Kit

EV9437-95 – SEN Quad Upgrade Kit

Please click on “DOCUMENTS” tab for the full product line spec sheets.

Connect with us