Everpure® Insurice® 2000/4000/SI/FCS Cartridges

Ice Machine Filtration

EV9606-51-4SI-Cartridge

Three different families of cartridges to choose from.  Use the same cartridge in each head and remember to change them all at the same time.

 

Our trademark Precoat filter cartridges . There two different sizes to choose from.  The traditional ‘7-size’, which is the i2000(2) cartridge and the higher capacity ‘X-size’, which is the i4000(2) cartridge. Both cartridges provide 1/2 micron fine filtration, chlorine reduction and are certified NSF/ANSI Standard 42 & 53.  Having NSF Std. 53 means these cartridges are certified to remove parasitic cysts such as Cryptosporidium and Giardia Lamblia.

 

#EV9612-22 i2000(2) cartridge – 1.67 gpm flow rate – 9,000 gallons capacity per cartridge

#EV9612-32 i4000(2) cartridge – 1.67 gpm flow rate – 12,000 gallons capacity per cartridge

 

Our new high capacity, high flow FC-S carbon block cartridges. There are four cartridges to choose from.   All four provide fine filtration and chlorine reduction.  All four are certified NSF/ANSI Standard 42 but only two are NSF certified Std. 53 for cyst reduction.

 

#EV9692-31 4FC-S – 2.50 gpm flow rate – 15,000 gallons capacity per cartridge – NSF. Std. 53

#EV9693-31 4FC5-S – 2.50 gpm flow rate – 15,000 gallons capacity per cartridge – 5 microns

#EV9692-71 7FC-S – 2.50 gpm flow rate – 25,000 gallons capacity per cartridge – NSF Std. 53

#EV9693-71 7FC5-S – 2.50 gpm flow rate – 25,000 gallons capacity per cartridge – 5 microns

 

 

Our new carbonless SI cartridges are ASHRAE Standard 188 Compliant.  ASHRAE Std. 188 compliant means these two cartridges maintain the 0.5 mg/l disinfectant residual level while still delivering other important water filtration benefits.  To find out more about this important protocol for ice machines in hospitals, please refer to the ASHRAE borchure found in the documents section below.

 

#EV9606-01 7SI – 3.5 gpm flow rate – 25,000 gallons capacity per cartridge – NSF Std. 53

#EV9606-51 4SI – 2.0 gpm flow rate – 15000 gallons capacity per cartrige – NSF Std. 53

 

Use only genuine Everpure replacement cartridges to protect your system’s performance, NSF certification and 5-year warranty

 

If you need help with how to change the cartridges, please contact us at technicalcare@danamark.com or give us a shout at 1-888-326-1108.

 

If you would like us to change the cartridges for you, please consider joining our DanaCare Programme and receive our DanaSurance Lifetime Warranty on the hardware.  To join, please contact us at danacare@danamark.com or give us a shout at 1-888-326-0901.

 

Please click on the “DOCUMENTS” tab below for the full product line spec sheets.

 

Contact Sales

  • Service Flow Rate: From 1.67 gpm (6.32 Lpm) up to 2.5 gpm (9.46 Lpm)
  • Pressure Requirements: 10 – 125 psi (0.7 – 8.6 bar), non-shock
  • Maximum Temperature: 35 - 100°F (2 - 38°C)
  • Capacity: From 9,000 gallons (34,069 L) up to 25,000 gallons (94,635 L)
  • Dimensions: n/a

How often should I change my filters?

In order for Everpure filters to perform as represented and to provide the best quality water possible, it is essential that filters be replaced periodically. The frequency of filter changes depends upon your water quality and your water usage. similar sites . For example, if there is a lot of...

Get in touch