Everpure® Insurice® 4FC-S & 7FC-S Systems

For Ice Machines

FC Insurice Systems provide exceptional flow rates and capacity for Ice Machines needing increased flow rates

 

Ice is 100% water.  No matter what model of ice maker you have, water filtration is of paramount importance to ensuring not only great tasting, hard ice cubes but minimal downtime for maintenance and deliming.  Just like you wouldn’t drive your car without an oil filter, you can’t run your ice maker without a water filter. Two thirds of all ice machine breakdowns are water-related.  The cost of downtime, repairs and wear and tear on your equipment far surpasses the cost of maintaining a quality water filter system.

 

Everpure Insurice systems have been the industry standard for more than 75 years.  We have the ‘right-sized’ system for your needs.  Let us quickly and effectively recommend options to meet your needs.  The FC ice systems are designed for ice makers requiring 7.5 to 10 gallons per minute.  Should you require a lower flow rate, please look at our Insurice 2000 and Insurice 4000 systems.

 

FCS System features include:

  • Available in triple and quad systems
  • With sediment prefiltration
  • With built-in scale inhibition, due to hard water
  • Available in “4” (4FC-S) and “7” (7FC-S) size filter cartridges to suit your space requirements
  • Replacement cartridges available in 0.50 microns (FC-S) and 5 microns (FC5-S)
  • Flow rates from 7.5 gpm up to 10 gpm
  • Filtration capacity from 60,000 up to 100,000 gallons
  • Certified NSF/ANSI Standard 42 & 53

 

Peace of mind: All systems come with a 5 year manufacturer’s warranty.  Join our national service programme, DanaCare, and we will cover you for life!

 

Let us help you with choosing the right system at technicalcare@danamark.com.  How about installation?  We’ve got you covered!   We have a national network of experienced service providers, at your service.

 

Here is a link to our Customer Care team – askus@danamark.com

 

Please click on the “DOCUMENTS” tab below to see the full product line spec sheets.

 

Connect with us

  • Service Flow Rate: Please refer to spec sheets
  • Pressure Requirements: 10 - 125 psi (0.7 - 8.6 bar), non-shock
  • Maximum Temperature: 35 - 100oF (2 - 38oC)
  • Capacity: Please refer to spec sheets
  • Dimensions: Please refer to spec sheets

This product works best with these applications

Combined Sewer Overflows

The water treatment industry in general is primarily concerned with treating influent water for human consumption either at the point-of-entry (POE) or at the point-of-use (POU). However, it is equally interesting to consider what happens to water after consumption. Indeed, innovative design and...

Get in touch