Everpure® RO (Reverse Osmosis) Cartridges

RO Replacement Cartridges and Cartridge Kits

 

Depending on the system you have, we have cartridge kits as well as individual cartridges for you to choose from.

 

RO Cartridge Categories

Everpure Reverse Osmosis systems are comprised of basically four categories of replacement cartridges:

  • Carbon Prefiltration
  • RO Module (or membrane)
  • Remineralization Feeder
  • Post Filter

Within these categories, we have a broad range of cartridges to choose from.  Please consult this reference chart

 

For Conserv High Efficiency Reverse Osmosis Systems:

Conserv LT-S  Cartridge Kit: Part #EV9976-25

Conserv RO-75S  Cartridge Kit: Part #EV9976-25

Conserv RO-75E  Cartridge Kit: Part #EV9977-25

 

For MRS100, 225, 350 and 600 High Efficiency Systems, please refer to this chart.

 

Frequency of cartridge change:

The rule of thumb is to replace the carbon prefilter, post filter and feeder every 6 months and the RO module membrane every 12 months. These are guidelines only and site specific to your application.  Everpure RO systems are equipped with a blending feature, which provides you with the flexibility of blending 100% RO water with a percentage of filtered ‘mineral’ water in order to meet the specific ingredient water recipe for your beverages and equipment performance.  Based on that blending ratio, your RO membrane cartridge may last longer or expire sooner. It is important to perform periodic maintenance to check the TDS (total dissolved solids) of your effluent water to gauge the efficiency / lifespan of the RO membrane.

 

Use only genuine Everpure replacement cartridges to protect your systems performance, NSF certification and five-year manufacturer’s warranty.

 

If you need help with how to change the cartridges, please contact us at technicalcare@danamark.com or give us a shout at 1-888-326-1108.

 

If you would like us to change the cartridges for you, please consider joining our DanaCare Programme and receive our DanaSurance Lifetime Warranty on the hardware.  To join, please contact us at danacare@danamark.com or give us a shout at 1-888-326-0901.

 

Connect With Us

  • Service Flow Rate: Please refer to spec sheets
  • Pressure Requirements: 125 PSI (8.6 bar)
  • Maximum Temperature: 32-100°F (0 – 37.7°C)
  • Capacity: Please refer to spec sheets
  • Dimensions: Please refer to spec sheets

This product works best with these applications

Understanding PFAS 'Forever Chemicals'

Per- and polyfluoroalkyl substances (PFAS) are synthetic chemicals known as "forever chemicals" because they do not break down in the environment or in the human body.

They are found in many products, including:

Clothing
Carpets
Non-stick cookware
Food packaging
Adhesives
...

Get in touch